Siser Easy Weed Adhesive Heat Transfer For Textiles

Regular price $ 1.99

EasyWeed® Adhesive for FOIL TRANSFER

Create Shining Decorations For Less!


EasyWeed Adhesive lets you create a trendy style without breaking the bank. Compatible with cost effective screen printing foils, this adhesive is a money saver and a money maker!  In addition to screen print foils, EasyWeed Adhesive is compatible with fabrics and other materials that lend themselves to adhesion. The milky colored adhesive shares benefits of EasyWeed such as a pressure sensitive carrier and low application temperature. Therefore, the standard cutting process for cuttable materials is used when working with EasyWeed Adhesive. Weeding on a dark surface will provide the best visibility. EasyWeed Adhesive can be cut with laser systems.

EasyWeed Adhesive is CPSIA Certified, so it can be used for decorating children’s clothing and apparel.

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5 seconds
• Peel carrier hot 

Application Instructions (heat press)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 275°F/135°C
• Use medium pressure for 5-10 seconds
• Peel carrier hot

Cutter Settings
CRICUT
Blade: Standard

Setting: Iron On

SILOUHETTE CAMEO
Blade: Standard,2
Material: Heat Transfer, Smooth
Speed: 8
Force: 4

BROTHER SCAN N CUT
Blade: Standard,2
Speed: 1
Pressure: 1

Roland GS/GX-24:

Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s

Graphtec:

Blade: 45°
Gram Force: 9-10
Tool: CB09U+0
Speed: 30 cm/s

MH, SC2, LP3, and Titan 1:

Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies

Titan 2 & 3:

Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.